Special Design for Aspheric Polycarbonate Lenses - 1.74 MR-174 FSV High Index HMC optical lenses – Boris
Special Design for Aspheric Polycarbonate Lenses - 1.74 MR-174 FSV High Index HMC optical lenses – Boris Detail:
Production Details
| Place of Origin: | Jiangsu | Brand Name: | BORIS |
| Model Number: | High Index Lens | Lenses Material: | MR-174 |
| Vision Effect: | Single Vision | Coating Film: | HMC/SHMC |
| Lenses Color: | White(indoor) | Coating Color: | Green/Blue |
| Index: | 1.74 | Specific Gravity: | 1.47 |
| Certification: | CE/ISO9001 | Abbe Value: | 32 |
| Diameter: | 75/70/65mm | Design: | Asperical |
The MR-174 is the star of the MR series family, with the highest refractive index in the series, making it the ultimate thin and light lens.
The MR-174 material has a refractive index of 1.74, an Abbe Value of 32, and a heat distortion temperature of 78°C. While achieving extreme lightness and thinness, it also uses “Do Green” products derived from plant materials.
MR-174 is a representative high-refractive index product in the global lens market. Therefore, consumers with higher degrees, or consumers who pursue the thin and light performance of lenses and are very concerned about environmental protection, widely buy MR. Lenses made of -174 material.
Production Introduction
Comparison of 1.74 and 1.67:
1.67 and 1.74 both represent the refractive index of the lens, and the specific difference is in the following four aspects.
1. Thickness
The higher the index of refraction of the material, the stronger the ability to refract incident light. The higher the refractive index, the thinner the thickness of the lens, that is, the thickness of the center of the lens is the same, the same degree of the same material, the edge of the lens with high refractive index is thinner than the edge of the lens with low refractive index.
That is to say, in the case of the same degree, a lens with a refractive index of 1.74 is thinner than a lens with a refractive index of 1.67.
2. Weight
Higher refractive index, thinner lenses, and lighter lenses for a more comfortable wearing experience.
That is to say, in the case of the same degree, a lens with a refractive index of 1.74 is lighter than a lens with a refractive index of 1.67.
3. Abbe Value (dispersion coefficient)
Generally speaking, the higher the refractive index of the lens, the more obvious the rainbow pattern on the edge when looking at things. This is the dispersion phenomenon of the lens, which is generally expressed by the Abbe Value (dispersion coefficient). The higher the Abbe Value , the better. The minimum Abbe Value of lenses for human wearing cannot be lower than 30.
Product Process
Product Video
Product detail pictures:
Related Product Guide:
We can always satisfy our respected customers with our good quality, good price and good service due to we are more professional and more hard-working and do it in cost-effective way for Special Design for Aspheric Polycarbonate Lenses - 1.74 MR-174 FSV High Index HMC optical lenses – Boris , The product will supply to all over the world, such as: Belgium, Manila, Ireland, They're durable modeling and promoting effectively all over the world. Under no circumstances disappearing major functions in a quick time, it's a should for you of excellent good quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the company make a terrific efforts to expand its international trade, raise its company profit and raise its export scale. We're confident that we are going to possess a vibrant prospect and to be distributed all over the world within the years to come.
By Polly from Boston - 2018.06.05 13:10
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Abigail from azerbaijan - 2018.06.21 17:11
